Custom Electronic Enclosures
Enclosures designed, machined & molded.
Custom aluminum, ABS, PC and sheet-metal enclosures — with PCB-perfect cutouts, IP-rated sealing and finish options from anodize to silkscreen. Prototype to 5,000+ units.
- Machined
- CNC
- Molded
- IM
- Sealed
- IP67
- Annual runs
- 5,000+
Enclosure Types
Four manufacturing routes
Finishes & Branding
Every surface, every finish
- Anodize (type II / III) · any RAL color
- Powder coat · textured or smooth
- Bead blast + matte / satin
- Silkscreen printing · 2 – 6 color
- Pad printing on curved surfaces
- Laser engraving · deep or surface
- Labels: UL-listed overlay · lexan
- IP sealing with gaskets (IP54 – IP68)
Enclosure Capability
Published range
| Processes | |
| CNC Machining | 3 / 4 / 5-axis · ±0.05 mm |
|---|---|
| Injection molding | 50 – 800 ton presses |
| Sheet metal | Laser cut + brake + weld |
| Extrusion | Custom aluminum profiles |
| Materials | |
| Metals | AL 6061 · AL 5052 · SS 304 · brass |
| Plastics | ABS · PC · PC+ABS · PP · PEI (Ultem) · Nylon |
| Sealing | |
| IP rating | IP40 – IP68 |
| Gasket | Silicone · EPDM · foam |
| Finishes | |
| Anodize / coat | Type II / III · RAL colors |
| Print / engrave | Silkscreen · pad · laser engrave |
| Documentation | |
| Prototype | 5–10 business days |
| Tooling (IM) | 3–5 weeks · validated |
| Production | 2–4 weeks per batch |
Frequently Asked Questions
Enclosure FAQ
01Can you design the enclosure from my PCB?
Yes — send us your board outline + critical dimensions and we’ll design the enclosure for you. Mechanical engineers on staff, 5–10 day concept-to-STEP.
02Machined aluminum vs injection molded — which is cheaper?
Under ~500 units: CNC wins (no tooling). Over ~2,000 units: molded ABS wins thanks to per-part economics. Between those, it depends on geometry complexity — we’ll run a break-even analysis in the quote.
03Can you handle IP67+ sealing?
Yes. We design for compressible silicone gaskets, glued joints, and overmolded strain relief. IP67 tested with submersion; IP68 adds pressure cycling.
04Do you do drop / vibration testing?
Yes — in-house drop tester (1 m) and vibration shaker (up to 5 g, 5–2,000 Hz). Test reports included with the enclosure certification.
Ready when you are
Send your Gerber & BOM — get a quote in 24 hours.
NDA available · Free DFM review · Senior engineer response.