PCB Design Service
From block diagram to production-ready Gerber.
Senior layout engineers take your schematic — or your napkin sketch — and deliver fully signed-off Gerber, BOM, assembly drawings and SI reports. Fixed quote, zero scope creep.
What You Get
Deliverables shipped on every design
Schematic capture
Hierarchical schematic with net labels & design rules.
Multi-layer layout
2–40 layer layouts with controlled impedance.
SI / PI analysis
Polar, HyperLynx, ADS on request.
Thermal simulation
Component thermal load modeling.
DFM + DFA
Design-for-manufacturing + assembly review.
How It Works
Five stages, fixed quote
- 01RequirementsScope call + spec sheet.
- 02SchematicBlock → schematic with review gate.
- 03LayoutPlacement + routing + stack-up.
- 04SI / PIImpedance, crosstalk, power rails.
- 05Hand-offGerber + BOM + docs → fab.
Design Capability
What we can take on
| Board complexity | |
| Max layer count | 40 (any-layer HDI) |
|---|---|
| Max component count | 10,000+ (split across boards) |
| Min trace / space | 2 mil / 2 mil |
| High-speed design | |
| Max data rate | 112 Gbps PAM4 |
| Differential pairs | USB 3.2 · PCIe 5.0 · DDR5 · HDMI 2.1 |
| RF | Rogers / Isola substrates, up to 77 GHz |
| Tools & formats | |
| Design tools | Altium Designer · Cadence Allegro · Mentor PADS · KiCad · Eagle · OrCAD |
| Delivery formats | Gerber RS-274X · ODB++ · IPC-2581 + native source |
Frequently Asked Questions
PCB design service FAQ
01Who owns the IP of the final design?
You do — 100%. We transfer all native source files (Altium .PcbDoc / Allegro .brd / KiCad / etc.) plus Gerber, BOM and docs on project completion. Mutual NDA signed upfront.
02How is pricing structured?
Fixed quote per project, based on layer count, component count, BGA complexity and high-speed nets. No hourly billing, no scope-creep upcharges. Revisions during the defined review gates are included.
03Can you work with our chosen fab house, not just yours?
Yes. We deliver manufacturer-agnostic Gerber / ODB++ / IPC-2581 so you can shop the build. Obviously we’re happy to fab it too — but never required.
04What is the typical lead time?
Simple 4-layer: 2–3 weeks. 6–8 layer with BGA: 4–6 weeks. 12+ layer HDI with SI/PI analysis: 6–10 weeks. We’ll confirm the exact schedule with the fixed quote.
05Do you include signal integrity analysis?
Polar impedance stack-ups are included. HyperLynx / ADS channel simulation, full crosstalk analysis and power-rail simulation are optional add-ons, quoted separately.
Ready when you are
Send your Gerber & BOM — get a quote in 24 hours.
NDA available · Free DFM review · Senior engineer response.